Help regarding COIN SELECTOR

[mariuspmb]

Hi guys!

Sorry to disturb you but I need to solve an issue regarding a device I own.
It is about an G13MFT 07v15/5 coin selector that I want to use connected with a PC where I am playing the licensed SILVERJUKE.
Were can I fund an adequate cable to connect it with the PC and which driver should I use?

Many thanks for you help!

Best regards!

[silversmith builder]

i might be able to help you but it sounds that you have no or very little knowledge
about the coin mech you are trying to fit theres a lot more involved then just a cable

need more infoe and discription of what your trying to do if i can help will do it via
my email address

[mariuspmb]

Hi! Many thanks! Actually the coin selector is already programed to the coin I am using it. I had a guy dealing with, but until discovering this option we used the "manual" selection... so the coin selector was activating a relay and the relay was sending an impulse to a PC keyboard pushing one key, and from there to the PC and silver juke... but this system crushed a few times. Now I need to go on the straight option ...

can you help me?

and you e-mail address is?

Many thanks again ;)

[silversmith builder]